Skip to main content

You are here

Home > Power cable > EMC power cable > EMCMK-HF Halogen free EMC power cable

EMCMK-HF Halogen free EMC power cable

Cables may be laid indoor, also in wet locations and outdoor for fixed installations on wall and on metallic structures. Direct burial in soil is allowed, as long as the relevant national rules of installations are followed. Halogen free cables are recommended when it is important to avoid thick smoke and corrosive gases, in case of fire or overheating. Collective screen gives an excellent protection against electromagnetic radiation to the cable

SFS 5546; HD 604 S1:1994/A3:2005 Part 5 Section I and D Applicable Parts

Special property: 
Flame retardant EN 60332-3-23, halogen free EN 60754-2, low smoke EN 61034-2, EMC-screened, EN 50289-1-6 Electromagnetic compability,
Fire class: 
Dca-s2, d2, a2
CPR - DoP: 
2017009_DOP.pdf
201738_DOP.pdf
Conductor: 

1,5…6 mm² circular solid copper, IEC 60228 class 2
10…16 mm² circular stranded copper, IEC 60228 class 2
25…300 mm² annealed sector shaped stranded copper, IEC 60228 class 2

Insulation: 
XLPE compound
Identification: 

3x: brown, black, grey
4x: blue, brown, black, grey

Filling material: 
Halogen free compound or tape
Cu screen: 
Copper wires
Metallic screen: 
Copper tape
Outer sheath: 
Black UV-resistant halogen free polyolefine
SizeReka codePacking (m)
3x1,5/1,51146690500
Voltage600/1000 V
Diameter (mm)14
Weight240
Minimum allowed bending radius in installation (cm)17
Minimum allowed bending radius in final installation (cm)11
Maximum allowed pulling force when pulling from conductors (kN)0,23
Maximum DC resistance of phase conductor, +20°C (ohm/km)12,1
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146690
Download product info (PDF)
3x2,5/2,51146691500
Voltage600/1000 V
Diameter (mm)15
Weight300
Minimum allowed bending radius in installation (cm)18
Minimum allowed bending radius in final installation (cm)12
Maximum allowed pulling force when pulling from conductors (kN)0,38
Maximum DC resistance of phase conductor, +20°C (ohm/km)7,41
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146691
Download product info (PDF)
3x6/61146693500
Voltage600/1000 V
Diameter (mm)18
Weight490
Minimum allowed bending radius in installation (cm)22
Minimum allowed bending radius in final installation (cm)14
Maximum allowed pulling force when pulling from conductors (kN)0,9
Maximum DC resistance of phase conductor, +20°C (ohm/km)3,08
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146693
Download product info (PDF)
3x10/101146694500
Voltage600/1000 V
Diameter (mm)20
Weight720
Minimum allowed bending radius in installation (cm)24
Minimum allowed bending radius in final installation (cm)16
Maximum allowed pulling force when pulling from conductors (kN)1,5
Maximum DC resistance of phase conductor, +20°C (ohm/km)1,83
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146694
Download product info (PDF)
3x16/161146695500
Voltage600/1000 V
Diameter (mm)23
Weight1000
Minimum allowed bending radius in installation (cm)28
Minimum allowed bending radius in final installation (cm)18
Maximum allowed pulling force when pulling from conductors (kN)2,4
Maximum DC resistance of phase conductor, +20°C (ohm/km)1,15
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146695
Download product info (PDF)
3x25/161146696500
Voltage600/1000 V
Diameter (mm)25
Weight1200
Minimum allowed bending radius in installation (cm)30
Minimum allowed bending radius in final installation (cm)20
Maximum allowed pulling force when pulling from conductors (kN)3,75
Maximum DC resistance of phase conductor, +20°C (ohm/km)727
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146696
Download product info (PDF)
3x35/161146697500
Voltage600/1000 V
Diameter (mm)27
Weight1520
Minimum allowed bending radius in installation (cm)32
Minimum allowed bending radius in final installation (cm)22
Maximum allowed pulling force when pulling from conductors (kN)5,25
Maximum DC resistance of phase conductor, +20°C (ohm/km)524
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146697
Download product info (PDF)
3x50/251146698500
Voltage600/1000 V
Diameter (mm)30
Weight2150
Minimum allowed bending radius in installation (cm)36
Minimum allowed bending radius in final installation (cm)24
Maximum allowed pulling force when pulling from conductors (kN)7,5
Maximum DC resistance of phase conductor, +20°C (ohm/km)387
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146698
Download product info (PDF)
3x70/351146699500
Voltage600/1000 V
Diameter (mm)33
Weight2740
Minimum allowed bending radius in installation (cm)40
Minimum allowed bending radius in final installation (cm)26
Maximum allowed pulling force when pulling from conductors (kN)10,5
Maximum DC resistance of phase conductor, +20°C (ohm/km)268
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146699
Download product info (PDF)
3x95/501146700500
Voltage600/1000 V
Diameter (mm)37
Weight3850
Minimum allowed bending radius in installation (cm)44
Minimum allowed bending radius in final installation (cm)30
Maximum allowed pulling force when pulling from conductors (kN)14,25
Maximum DC resistance of phase conductor, +20°C (ohm/km)193
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146700
Download product info (PDF)
3x120/701146701500
Voltage600/1000 V
Diameter (mm)39
Weight4650
Minimum allowed bending radius in installation (cm)47
Minimum allowed bending radius in final installation (cm)31
Maximum allowed pulling force when pulling from conductors (kN)18
Maximum DC resistance of phase conductor, +20°C (ohm/km)153
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146701
Download product info (PDF)
3x150/701146702500
Voltage600/1000 V
Diameter (mm)45
Weight5750
Minimum allowed bending radius in installation (cm)54
Minimum allowed bending radius in final installation (cm)36
Maximum allowed pulling force when pulling from conductors (kN)20
Maximum DC resistance of phase conductor, +20°C (ohm/km)124
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146702
Download product info (PDF)
3x185/951146703500
Voltage600/1000 V
Diameter (mm)50
Weight7100
Minimum allowed bending radius in installation (cm)60
Minimum allowed bending radius in final installation (cm)40
Maximum allowed pulling force when pulling from conductors (kN)20
Maximum DC resistance of phase conductor, +20°C (ohm/km)0,0991
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146703
Download product info (PDF)
3x240/1201146704500
Voltage600/1000 V
Diameter (mm)55
Weight9100
Minimum allowed bending radius in installation (cm)66
Minimum allowed bending radius in final installation (cm)44
Maximum allowed pulling force when pulling from conductors (kN)20
Maximum DC resistance of phase conductor, +20°C (ohm/km)0,0754
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146704
Download product info (PDF)
4x1,5/1,51146710500
Voltage600/1000 V
Diameter (mm)15
Weight270
Minimum allowed bending radius in installation (cm)18
Minimum allowed bending radius in final installation (cm)12
Maximum allowed pulling force when pulling from conductors (kN)0,3
Maximum DC resistance of phase conductor, +20°C (ohm/km)12,1
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146710
Download product info (PDF)
4x2,5/2,51146711500
Voltage600/1000 V
Diameter (mm)16
Weight350
Minimum allowed bending radius in installation (cm)19
Minimum allowed bending radius in final installation (cm)13
Maximum allowed pulling force when pulling from conductors (kN)0,5
Maximum DC resistance of phase conductor, +20°C (ohm/km)7,41
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146711
Download product info (PDF)
4x6/61146713500
Voltage600/1000 V
Diameter (mm)18
Weight550
Minimum allowed bending radius in installation (cm)22
Minimum allowed bending radius in final installation (cm)14
Maximum allowed pulling force when pulling from conductors (kN)1,2
Maximum DC resistance of phase conductor, +20°C (ohm/km)3,08
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146713
Download product info (PDF)
4x10/101146714500
Voltage600/1000 V
Diameter (mm)22
Weight900
Minimum allowed bending radius in installation (cm)26
Minimum allowed bending radius in final installation (cm)18
Maximum allowed pulling force when pulling from conductors (kN)2
Maximum DC resistance of phase conductor, +20°C (ohm/km)1,83
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146714
Download product info (PDF)
4x16/161146715500
Voltage600/1000 V
Diameter (mm)25
Weight1250
Minimum allowed bending radius in installation (cm)30
Minimum allowed bending radius in final installation (cm)20
Maximum allowed pulling force when pulling from conductors (kN)3,2
Maximum DC resistance of phase conductor, +20°C (ohm/km)1,15
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146715
Download product info (PDF)
4x25/161146716500
Voltage600/1000 V
Diameter (mm)30
Weight1700
Minimum allowed bending radius in installation (cm)36
Minimum allowed bending radius in final installation (cm)24
Maximum allowed pulling force when pulling from conductors (kN)5
Maximum DC resistance of phase conductor, +20°C (ohm/km)727
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146716
Download product info (PDF)
4x35/161146717500
Voltage600/1000 V
Diameter (mm)28
Weight1800
Minimum allowed bending radius in installation (cm)34
Minimum allowed bending radius in final installation (cm)22
Maximum allowed pulling force when pulling from conductors (kN)7
Maximum DC resistance of phase conductor, +20°C (ohm/km)524
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146717
Download product info (PDF)
4x50/251146718500
Voltage600/1000 V
Diameter (mm)31
Weight2400
Minimum allowed bending radius in installation (cm)37
Minimum allowed bending radius in final installation (cm)25
Maximum allowed pulling force when pulling from conductors (kN)10
Maximum DC resistance of phase conductor, +20°C (ohm/km)387
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146718
Download product info (PDF)
4x70/351146719500
Voltage600/1000 V
Diameter (mm)35
Weight3400
Minimum allowed bending radius in installation (cm)42
Minimum allowed bending radius in final installation (cm)28
Maximum allowed pulling force when pulling from conductors (kN)14
Maximum DC resistance of phase conductor, +20°C (ohm/km)268
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146719
Download product info (PDF)
4x95/501146720500
Voltage600/1000 V
Diameter (mm)40
Weight4600
Minimum allowed bending radius in installation (cm)48
Minimum allowed bending radius in final installation (cm)32
Maximum allowed pulling force when pulling from conductors (kN)19
Maximum DC resistance of phase conductor, +20°C (ohm/km)193
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146720
Download product info (PDF)
4x120/701146721500
Voltage600/1000 V
Diameter (mm)44
Weight5800
Minimum allowed bending radius in installation (cm)53
Minimum allowed bending radius in final installation (cm)35
Maximum allowed pulling force when pulling from conductors (kN)20
Maximum DC resistance of phase conductor, +20°C (ohm/km)153
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146721
Download product info (PDF)
4x150/701146722500
Voltage600/1000 V
Diameter (mm)48
Weight7000
Minimum allowed bending radius in installation (cm)58
Minimum allowed bending radius in final installation (cm)38
Maximum allowed pulling force when pulling from conductors (kN)20
Maximum DC resistance of phase conductor, +20°C (ohm/km)124
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146722
Download product info (PDF)
4x185/951146723500
Voltage600/1000 V
Diameter (mm)55
Weight8800
Minimum allowed bending radius in installation (cm)66
Minimum allowed bending radius in final installation (cm)44
Maximum allowed pulling force when pulling from conductors (kN)20
Maximum DC resistance of phase conductor, +20°C (ohm/km)0,0991
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146723
Download product info (PDF)
4x240/1201146724500
Voltage600/1000 V
Diameter (mm)61
Weight11500
Minimum allowed bending radius in installation (cm)73
Minimum allowed bending radius in final installation (cm)49
Maximum allowed pulling force when pulling from conductors (kN)20
Maximum DC resistance of phase conductor, +20°C (ohm/km)0,0754
Minimum handling temperature (°C)-15
Maximum conductor temperature (°C)90
Conductor short-circuit temperature, 5 s (°C)250
Product number1146724
Download product info (PDF)