Skip to main content

AEMCMK-HF Halogen free EMC power cable

Cables may be laid indoor, also in wet locations and outdoor for fixed installations on wall and on metallic structures. Direct burial in soil is allowed, as long as the relevant national rules of installations are followed. Halogen free cables are recommended when it is important to avoid thick smoke and corrosive gases, in case of fire or overheating. Collective screen gives an excellent protection against electromagnetic radiation to the cable

Special property:

Flame retardant EN 60332-3-23, halogen free EN 60754-2, low smoke EN 61034-2, EMC-screened, EN 50289-1-6 Electromagnetic compability,

Fire class:

Dca-s2, d2, a2

CPR - DoP:

2017008_DOP.pdf

Conductor:

16 mm² circular stranded aluminium (IEC 60228 class 2)
25…300 mm² sector shaped aluminium (IEC 60228 class 2)

Insulation:

XLPE compound

Identification:

3x: brown, black, grey
4x: blue, brown, black, grey

Filling material:

Halogen free compound or tape

Cu screen:

Copper wires

Metallic sheath:

Copper tape

Outer sheath:

Black UV-resistant halogen free polyolefine

Size

Reka code

Packing (m)

3x16/16

1149200

500

Voltage	600/1000 V
Diameter (mm)	21
Weight	620
Minimum allowed bending radius in installation (cm)	25
Minimum allowed bending radius in final installation (cm)	17
Maximum allowed pulling force when pulling from conductors (kN)	0,72
Maximum DC resistance of phase conductor, +20°C (ohm/km)	1,91
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149200

Download product info (PDF)

3x25/16

1149201

500

Voltage	600/1000 V
Diameter (mm)	23
Weight	740
Minimum allowed bending radius in installation (cm)	28
Minimum allowed bending radius in final installation (cm)	18
Maximum allowed pulling force when pulling from conductors (kN)	1,13
Maximum DC resistance of phase conductor, +20°C (ohm/km)	1,2
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149201

Download product info (PDF)

3x35/16

1149202

500

Voltage	600/1000 V
Diameter (mm)	27
Weight	900
Minimum allowed bending radius in installation (cm)	32
Minimum allowed bending radius in final installation (cm)	22
Maximum allowed pulling force when pulling from conductors (kN)	1,58
Maximum DC resistance of phase conductor, +20°C (ohm/km)	868
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149202

Download product info (PDF)

3x50/16

1149203

500

Voltage	600/1000 V
Diameter (mm)	28
Weight	1100
Minimum allowed bending radius in installation (cm)	34
Minimum allowed bending radius in final installation (cm)	22
Maximum allowed pulling force when pulling from conductors (kN)	2,25
Maximum DC resistance of phase conductor, +20°C (ohm/km)	641
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149203

Download product info (PDF)

3x70/21

1149204

500

Voltage	600/1000 V
Diameter (mm)	31
Weight	1400
Minimum allowed bending radius in installation (cm)	37
Minimum allowed bending radius in final installation (cm)	25
Maximum allowed pulling force when pulling from conductors (kN)	3,15
Maximum DC resistance of phase conductor, +20°C (ohm/km)	443
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149204

Download product info (PDF)

3x95/29

1149205

500

Voltage	600/1000 V
Diameter (mm)	36
Weight	1800
Minimum allowed bending radius in installation (cm)	43
Minimum allowed bending radius in final installation (cm)	29
Maximum allowed pulling force when pulling from conductors (kN)	4,28
Maximum DC resistance of phase conductor, +20°C (ohm/km)	0,32
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149205

Download product info (PDF)

3x120/41

1149206

500

Voltage	600/1000 V
Diameter (mm)	40
Weight	2250
Minimum allowed bending radius in installation (cm)	48
Minimum allowed bending radius in final installation (cm)	32
Maximum allowed pulling force when pulling from conductors (kN)	5,4
Maximum DC resistance of phase conductor, +20°C (ohm/km)	253
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149206

Download product info (PDF)

3x150/41

1149207

500

Voltage	600/1000 V
Diameter (mm)	44
Weight	2650
Minimum allowed bending radius in installation (cm)	53
Minimum allowed bending radius in final installation (cm)	35
Maximum allowed pulling force when pulling from conductors (kN)	6,75
Maximum DC resistance of phase conductor, +20°C (ohm/km)	206
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149207

Download product info (PDF)

3x185/57

1149208

500

Voltage	600/1000 V
Diameter (mm)	48
Weight	3250
Minimum allowed bending radius in installation (cm)	58
Minimum allowed bending radius in final installation (cm)	38
Maximum allowed pulling force when pulling from conductors (kN)	8,33
Maximum DC resistance of phase conductor, +20°C (ohm/km)	164
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149208

Download product info (PDF)

3x240/72

1149209

500

Voltage	600/1000 V
Diameter (mm)	53
Weight	4100
Minimum allowed bending radius in installation (cm)	64
Minimum allowed bending radius in final installation (cm)	42
Maximum allowed pulling force when pulling from conductors (kN)	10,8
Maximum DC resistance of phase conductor, +20°C (ohm/km)	125
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149209

Download product info (PDF)

3x300/88

1149210

500

Voltage	600/1000 V
Diameter (mm)	58
Weight	4900
Minimum allowed bending radius in installation (cm)	70
Minimum allowed bending radius in final installation (cm)	46
Maximum allowed pulling force when pulling from conductors (kN)	13,5
Maximum DC resistance of phase conductor, +20°C (ohm/km)	0,1
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149210

Download product info (PDF)

4x16/16

1149214

500

Voltage	600/1000 V
Diameter (mm)	22
Weight	650
Minimum allowed bending radius in installation (cm)	26
Minimum allowed bending radius in final installation (cm)	18
Maximum allowed pulling force when pulling from conductors (kN)	0,96
Maximum DC resistance of phase conductor, +20°C (ohm/km)	1,91
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149214

Download product info (PDF)

4x25/16

1149215

500

Voltage	600/1000 V
Diameter (mm)	24
Weight	770
Minimum allowed bending radius in installation (cm)	29
Minimum allowed bending radius in final installation (cm)	19
Maximum allowed pulling force when pulling from conductors (kN)	1,5
Maximum DC resistance of phase conductor, +20°C (ohm/km)	1,2
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149215

Download product info (PDF)

4x35/16

1149216

500

Voltage	600/1000 V
Diameter (mm)	28
Weight	950
Minimum allowed bending radius in installation (cm)	34
Minimum allowed bending radius in final installation (cm)	22
Maximum allowed pulling force when pulling from conductors (kN)	2,1
Maximum DC resistance of phase conductor, +20°C (ohm/km)	868
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149216

Download product info (PDF)

4x50/16

1149217

500

Voltage	600/1000 V
Diameter (mm)	30
Weight	1200
Minimum allowed bending radius in installation (cm)	36
Minimum allowed bending radius in final installation (cm)	24
Maximum allowed pulling force when pulling from conductors (kN)	3
Maximum DC resistance of phase conductor, +20°C (ohm/km)	641
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149217

Download product info (PDF)

4x70/21

1149218

500

Voltage	600/1000 V
Diameter (mm)	36
Weight	1600
Minimum allowed bending radius in installation (cm)	43
Minimum allowed bending radius in final installation (cm)	29
Maximum allowed pulling force when pulling from conductors (kN)	4,2
Maximum DC resistance of phase conductor, +20°C (ohm/km)	443
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149218

Download product info (PDF)

4x95/29

1149219

500

Voltage	600/1000 V
Diameter (mm)	38
Weight	2050
Minimum allowed bending radius in installation (cm)	46
Minimum allowed bending radius in final installation (cm)	30
Maximum allowed pulling force when pulling from conductors (kN)	5,7
Maximum DC resistance of phase conductor, +20°C (ohm/km)	0,32
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149219

Download product info (PDF)

4x120/41

1149220

500

Voltage	600/1000 V
Diameter (mm)	44
Weight	2550
Minimum allowed bending radius in installation (cm)	53
Minimum allowed bending radius in final installation (cm)	35
Maximum allowed pulling force when pulling from conductors (kN)	7,2
Maximum DC resistance of phase conductor, +20°C (ohm/km)	253
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149220

Download product info (PDF)

4x150/41

1149221

500

Voltage	600/1000 V
Diameter (mm)	48
Weight	3100
Minimum allowed bending radius in installation (cm)	58
Minimum allowed bending radius in final installation (cm)	38
Maximum allowed pulling force when pulling from conductors (kN)	9
Maximum DC resistance of phase conductor, +20°C (ohm/km)	206
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149221

Download product info (PDF)

4x185/57

1149222

500

Voltage	600/1000 V
Diameter (mm)	53
Weight	3850
Minimum allowed bending radius in installation (cm)	64
Minimum allowed bending radius in final installation (cm)	42
Maximum allowed pulling force when pulling from conductors (kN)	11,1
Maximum DC resistance of phase conductor, +20°C (ohm/km)	164
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149222

Download product info (PDF)

4x240/72

1149223

500

Voltage	600/1000 V
Diameter (mm)	59
Weight	4800
Minimum allowed bending radius in installation (cm)	71
Minimum allowed bending radius in final installation (cm)	47
Maximum allowed pulling force when pulling from conductors (kN)	14,4
Maximum DC resistance of phase conductor, +20°C (ohm/km)	125
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149223

Download product info (PDF)

4x300/88

1149224

500

Voltage	600/1000 V
Diameter (mm)	64
Weight	5900
Minimum allowed bending radius in installation (cm)	77
Minimum allowed bending radius in final installation (cm)	51
Maximum allowed pulling force when pulling from conductors (kN)	18
Maximum DC resistance of phase conductor, +20°C (ohm/km)	0,1
Minimum handling temperature (°C)	-15
Maximum conductor temperature (°C)	90
Conductor short-circuit temperature, 5 s (°C)	250
Product number	1149224

Download product info (PDF)